Cleaning for silo inspection exposes agreed internal surfaces and allows visible condition to be recorded. It may follow repeated build-up, suspected lining damage or a planned maintenance shutdown.
Silo Inspection
Cleaning for silo inspection exposes agreed internal surfaces and records visible condition without replacing structural testing.
HomeSilo InspectionSilo Inspection enquiry
Inspection access
The available view of walls, outlets and fittings determines which conditions can be recorded during inspection.
Recorded findings
Photographs and location references help distinguish observed defects from areas that remain inaccessible.
Visual access and its limits
Product on a wall can conceal the very joint or surface an inspector needs to examine. Cleaning should expose that area without damaging it. Views through existing openings can be useful, but internal fittings and vessel geometry may leave blind spots. We identify those limits. A visual observation of corrosion is not a wall-thickness measurement, and neither a clean surface nor a photograph certifies structural integrity.
Discuss cleaning for silo inspection
Complete the form and we will get back to you.
Using the findings
We record accessible defects by location and distinguish them from areas that need a measurement or specialist test. The responsible specialist defines any test method and acceptance standard, while our record shows the surfaces that were visible.
We also record any deposits that still obscure the surrounding surface.
Silo Inspection: common questions
Does the silo need cleaning before inspection?
Only if deposits obstruct the surfaces being assessed. The required cleaning extent should follow the inspection purpose.
Is a visual inspection a structural certificate?
No. Structural assessment and any required testing need the appropriate engineering assessment and competence.
What if a fitting blocks the inspection view?
We identify the obstruction and the area that cannot be seen. Additional access or another inspection method may be needed to answer the original question.
Can cleaning help before wall-thickness testing?
Yes, where deposits obstruct the measurement points. The testing procedure determines the surface preparation required and what the measurements establish.